RE: [sap-log-mm] PR Release with classification

Posted by aamir_majeed (SAP COORDINATOR)
on Jun 4 at 3:44 PM
Dear, this type of error occur due to inconsistencies of PR release group, please delete release group, save it and create it again, it will work.



Regards
Aamir Majeed

+92-(0)321-2088774

---------------Original Message---------------
From: sapuser3
Sent: Saturday, June 04, 2011 1:27 PM
Subject: PR Release with classification

Hello all,
I have created the CHARACTERISTICS: 1. PRTYPE with CEBAN and BSART
2. PRPLANT with CEBAN and WERKS
3. PRVALUE with CEBAN and GSWRT
and CLASS: PRRELEASE with relase starateygy 032
But when I try to create RELEASE GROUPS AA with class as PRRELEASE I am getting the below error.
Please check release classes (see long text)
Please help me to solve this.
Regards,
SA

__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
Mark as helpful
View this online
  
Popular White Papers

In the Spotlight
Earn Recognition for Your Contributions at Toolbox for IT. Gain Points for Community Achievements
_.____.__

[sap-log-mm] PR Release with classification

Posted by sapuser3
on Jun 4 at 1:27 PM
Hello all,
I have created the CHARACTERISTICS: 1. PRTYPE with CEBAN and BSART
2. PRPLANT with CEBAN and WERKS
3. PRVALUE with CEBAN and GSWRT
and CLASS: PRRELEASE with relase starateygy 032
But when I try to create RELEASE GROUPS AA with class as PRRELEASE I am getting the below error.
Please check release classes (see long text)
Please help me to solve this.
Regards,
SA
__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
View this online
  
_.____.__

RE:[sap-log-mm] ME59n Auto PO but no output determinate

Posted by Logistic Consultant
on Jun 4 at 10:09 AM
Hi, HT,

Yes, they are the same.

BR
Wings

---------------Original Message---------------
From: Logistic Consultant
Sent: Wednesday, June 01, 2011 5:58 AM
Subject: ME59n Auto PO but no output determinate

Hi,

We are using me59n to create PO automatically. POs are created successfully, but could not determinate output.

However, when use me57 to convert po manually, we do not have this problem.

Any advice and suggestion ?

Thanks
Wings

__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
Mark as helpful
View this online
  
Popular White Papers

In the Spotlight
Toolbox.com Marketplace: Take online training courses in SAP and other specialized areas of business and IT.
_.____.__

RE:[sap-log-mm] A PO goes back to unreleased after a valid GR/IR

Posted by Henmc
on Jun 3 at 5:23 PM
Yes, there is a release strategy, all the approvers released them (all with green check marks) prior to the first receipt whose quantity is valid - less than 10% of the order quantity. But as a succeeding receipt was to be done, it went into error 'cause for some reason, the release strategy shows that the approvers did not release them yet. the check marks were gone. But nobody made changes to the PO before the second receipt.

---------------Original Message---------------
From: Henmc
Sent: Friday, June 03, 2011 12:39 PM
Subject: A PO goes back to unreleased after a valid GR/IR

Hi guys. What are the possible causes for a PO to unreleased? A certain PO has ordered quantity of 400,000. Only 2000 was received & posted correctly via MB01. Then when another receipt was to be done, the user encounters an error 'cause the PO has not been released yet. But nobody touched the PO after the initial GR/IR was done. Need your help please. Thanks.

__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
Mark as helpful
View this online
  
Popular White Papers

In the Spotlight
Visit IBM's Leveraging IT Services Briefing Center. Register now and learn how to deliver smarter security & resiliency.
_.____.__

RE:[sap-log-mm] Does anyone have a simple MM01 (replacing) tool available?

Posted by TroyP
on Jun 3 at 3:54 PM
#1The best way is proper training, so many installations start out strong, but after a few years allow non trained employees start creating master data.It starts to go down hill from there.
Then I would say, #2 LSMW if you have the volume. You can write them yourself.
#3 GuiXT is a great product to use with SAP and it is not super expensive. Some people use GuiXT for training new team members as they come in. Again, it is a great tool.

---------------Original Message---------------
From: mairymano
Sent: Thursday, June 02, 2011 3:40 AM
Subject: Does anyone have a simple MM01 (replacing) tool available?

Hi,

Where user wants to simplify the input and most of the fields have default
values as per configuration and user dont know them, also most of the fields
dont use in configuration and no need to enter them.

And the specific views depends of different material types e.g if Raw
Material is not selling then no sales view and org structure will required.

SAP supports SAP MDM module (Master Data Management) and also can be
developed as in-house application development, as we did in ICI Paints,
developed the in-house application with user specific requirements in .NET
2008.

Best Regards,

Humaira Aslam Chughtai
SAP MM Consultant
ICI Paints, Pakistan

__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
Mark as helpful
View this online
  
_.____.__

RE: [sap-log-mm] Automatic creation of purchasing info record

Posted by rkingccm (Manager SD Projects)
on Jun 3 at 3:34 PM
Hi MT,

Thanks for your reply but I still do not see in the configuration where this is controlled. I'm not referring to a number range but a scenario where we can block the automatic creation of an info record if none previously existed.

Bob King
Carlisle Construction Materials
Manager IT - Sales and Distribution
717-245-7050 - office
717-877-0616 - cell
email@removed

---------------Original Message---------------
From: morise
Sent: Friday, June 03, 2011 2:52 PM
Subject: Automatic creation of purchasing info record

Hi

You can erase the info record number that the system picks automatically from the SAP standard. Refer IMG-MM-PUR-Info records

Cheers

MT

__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
Mark as helpful
View this online
  
Popular White Papers

In the Spotlight
Which response to your Toolbox.com Groups post was the most helpful? Use 'Best Answer' to mark highest quality content.
_.____.__

[sap-log-mm] STD SAP functionality where the MRP run does not consider expiring/expired batches

Posted by SAPuser26
on Jun 3 at 3:13 PM
I work in a pharma industry and we are currently on ECC 5.0.
I want to know if there is a standard SAP functionality(either in ECC 5.0 or 6.0) for the MRP run to exclude expired/expiring batches.
Currently we have a custom program doing this.
__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
View this online
  
_.____.__

[sap-log-mm] ERROR IN PO MESSAGE OUTPUT

Posted by morise (Senior Procurement analyst)
on Jun 3 at 3:04 PM
Hi expert,

Can someone explain why I am getting the error when creating a message output for a certain PO while other PO am able to print. The error message is invalid message output.
Cheers

MT
__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
View this online
  
Popular White Papers

In the Spotlight
Which response to your Toolbox.com Groups post was the most helpful? Use 'Best Answer' to mark highest quality content.
_.____.__

Re: [sap-log-mm] Automatic creation of purchasing info record

Posted by morise (Senior Procurement analyst)
on Jun 3 at 2:51 PM
Hi

You can erase the info record number that the system picks automatically from the SAP standard. Refer IMG-MM-PUR-Info records

Cheers

MT

---------------Original Message---------------
From: rkingccm
Sent: Friday, June 03, 2011 8:21 AM
Subject: Automatic creation of purchasing info record

Looking for guidance on the configuration setting to stop the creation of an automatic purchasing info record. Can't seem to identify the area in IMG that controls this setting.

__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
Mark as helpful
View this online
  
Popular White Papers

In the Spotlight
Toolbox.com for iPhone & Android: Ask Questions & Get Answers Anywhere. Download the Free App
_.____.__

[sap-log-mm] PR to take contract number through source list

Posted by Mr. S (SAP_SAN)
on Jun 3 at 1:38 PM
Hi Everyone
I have a fixed source in source list and I have maintained the contract number in it correctly. It is not MRP relevant.
When I create a PR by checking the source determination, the system is defaulting info records instead of contract number. Can you please guide me if I am missing anything?
Thank you all in advance.
__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
View this online
  
_.____.__

Re: [sap-log-mm] A PO goes back to unreleased after a valid GR/IR

Posted by mairymano (Software Engineer)
on Jun 3 at 1:19 PM
Hi,

Kindly also check if any workflow process implemented on which condition
types?


--

Best Regards,

Humaira Aslam Chughtai
SAP MM Consultant
ICI Paints, Pakistan

---------------Original Message---------------
From: Henmc
Sent: Friday, June 03, 2011 12:39 PM
Subject: A PO goes back to unreleased after a valid GR/IR

Hi guys. What are the possible causes for a PO to unreleased? A certain PO has ordered quantity of 400,000. Only 2000 was received & posted correctly via MB01. Then when another receipt was to be done, the user encounters an error 'cause the PO has not been released yet. But nobody touched the PO after the initial GR/IR was done. Need your help please. Thanks.

__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
Mark as helpful
View this online
  
_.____.__

Re: [sap-log-mm] A PO goes back to unreleased after a valid GR/IR

Posted by mairymano (Software Engineer)
on Jun 3 at 1:16 PM
Hi,

Kindly also check if any workflow process implemented on which condition ty

---------------Original Message---------------
From: Henmc
Sent: Friday, June 03, 2011 12:39 PM
Subject: A PO goes back to unreleased after a valid GR/IR

Hi guys. What are the possible causes for a PO to unreleased? A certain PO has ordered quantity of 400,000. Only 2000 was received & posted correctly via MB01. Then when another receipt was to be done, the user encounters an error 'cause the PO has not been released yet. But nobody touched the PO after the initial GR/IR was done. Need your help please. Thanks.

__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
Mark as helpful
View this online
  
Popular White Papers

In the Spotlight
Earn Recognition for Your Contributions at Toolbox for IT. Gain Points for Community Achievements
_.____.__

RE: [sap-log-mm] A PO goes back to unreleased after a valid GR/IR

Posted by PhilmoreK (SD and MM Team Lead)
on Jun 3 at 12:56 PM
Hi? is there a release strategy on the PO? That's what the error message is telling me.

Phil Kreilein
SAP TEAM LEAD
KIMBALL ELECTRONICS GROUP, INC
JASPER INDIANA 47549
PH: 812-634-4376
email@removed

---------------Original Message---------------
From: Henmc
Sent: Friday, June 03, 2011 12:39 PM
Subject: A PO goes back to unreleased after a valid GR/IR

Hi guys. What are the possible causes for a PO to unreleased? A certain PO has ordered quantity of 400,000. Only 2000 was received & posted correctly via MB01. Then when another receipt was to be done, the user encounters an error 'cause the PO has not been released yet. But nobody touched the PO after the initial GR/IR was done. Need your help please. Thanks.

__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
Mark as helpful
View this online
  
_.____.__

[sap-log-mm] A PO goes back to unreleased after a valid GR/IR

Posted by Henmc
on Jun 3 at 12:39 PM
Hi guys. What are the possible causes for a PO to unreleased? A certain PO has ordered quantity of 400,000. Only 2000 was received & posted correctly via MB01. Then when another receipt was to be done, the user encounters an error 'cause the PO has not been released yet. But nobody touched the PO after the initial GR/IR was done. Need your help please. Thanks.
__.____._
Copyright © 2011 Toolbox.com and message author.

Toolbox.com 4343 N. Scottsdale Road Suite 280, Scottsdale, AZ 85251
View this online
  
Popular White Papers

In the Spotlight
Toolbox.com Marketplace: Take online training courses in SAP and other specialized areas of business and IT.
_.____.__